Spray Foam Roofing in Arlington, TX

Spray foam roofing is high-density closed-cell foam sprayed over a clean, dry roof deck or an existing roof, then sealed with an elastomeric coating that protects the foam from sun. It forms a seamless layer with no laps or seams, adds insulation above the deck, and can be sloped slightly to move water toward drains. It suits the flat and low-slope roofs on commercial buildings, warehouses, strip centers and some homes and additions around Arlington.

Coatings

The coating carries the weather. HomeAdvisor lists silicone at $1.40 to $2.50 per square foot and acrylic at $0.15 to $0.75, and recommends a fresh topcoat every 10 to 15 years. With recoating on schedule, HomeAdvisor puts the life of a spray foam roof at 20 to 50 years.

Is your roof a candidate

The existing roof has to be dry, sound and attached; wet insulation underneath has to be found and removed. Ponding areas are addressed in the foam layer. Very steep roofs and roofs with heavy foot traffic may suit other systems better. The City of Arlington lists re-roofing among the jobs that require a permit, and we plan for that.

Why owners choose it

It can often go over an existing roof without a full tear-off, it insulates the building from the top, and it cuts down on the seams where low-slope roofs usually leak. A reflective coating also reduces heat gain under a Texas sun.

We inspect the roof, check for moisture and quote the foam thickness and coating in writing. Get a free estimate