Start over with a clean attic
Insulation Removal & Replacement in Arlington, TX
Old material vacuumed out, leaks sealed, new insulation in.
- Free on-site estimates
- Written quote with foam type, thickness and R-value for each area
- Attic, ducts and roof deck checked before anything is sprayed
When Insulation Removal & Replacement Makes Sense
Insulation removal and replacement is the right call when what is in the attic is doing more harm than good: soaked from a roof leak, soiled by rodents or birds, smoke damaged, or packed down to a few inches. Adding new insulation over that only buries the problem. Taking it out also exposes the ceiling plane so every leak can be sealed properly.
How we remove it
A high-power vacuum pulls loose fill out through a hose into collection bags outside, so the material never travels through the house. Batts are bagged by hand. Old spray foam can be cut or scraped off when it has to go, which takes longer and costs more.
Things we watch for
Vermiculite, a pebbly gray-brown loose fill, can contain asbestos and is not something we disturb; it calls for testing and an abatement contractor first. We also note wiring damage from rodents and any roof leaks so they are fixed before new insulation goes in.
Then replacement
With the attic clean, we seal the ceiling plane and reinsulate with blown-in or spray foam to the R-value you choose.
Tell us what you have found in the attic and we will look and quote it. Get a free estimate
What This Covers
Removal work.
Vacuum removal
Loose cellulose or fiberglass pulled out to bags outside.
Batt removal
Old batts bagged and hauled away.
Spray foam removal
Cutting or scraping foam that must come out.
Seal and reinsulate
New air sealing and insulation after cleanup.
Published Insulation Removal & Replacement Costs
| Job | Range and source |
|---|---|
| Insulation removal, per sq ft | $1 to $2 (HomeAdvisor) |
| Typical removal job | $600 to $1,200, about $900 average (HomeAdvisor) |
| About 1,000 sq ft | $1,000 to $2,000 (HomeAdvisor) |
| Removal plus replacement | About $1,852 average (HomeAdvisor) |
| Spray foam removal | $1.00 to $2.50 per sq ft (HomeGuide); $1.50 to $3, up to about $5 hand-chipped (Fixr) |
| Asbestos removal (abatement contractor) | $1,190 to $3,255 (HomeAdvisor) |
National ranges from HomeAdvisor (June 2026), HomeGuide (2026) and Fixr (2025). How much material there is, access, contamination and disposal set the cost. We give you a written estimate after the visit, and that estimate is the price.
Removal Step by Step
1. Inspect
Identify the material, its condition and any vermiculite or leaks.
2. Protect
Cover the path and set up the vacuum outside.
3. Remove
Vacuum or bag out the old insulation.
4. Seal and insulate
Air seal the clean ceiling and install new insulation.
Insulation Removal & Replacement Questions
Do I need to remove old insulation before adding more?
Not if it is dry and clean. Wet, moldy or animal-soiled insulation should come out.
What if I have vermiculite?
Leave it alone and have it tested. If it contains asbestos, an abatement contractor removes it before other work.
How long does removal take?
Many attics are cleared in a day, with reinsulation the same day or the next.
Is spray foam hard to remove?
Yes. It is cut or scraped by hand, which is why foam removal costs more per square foot.
Insulation Removal & Replacement Service Areas
- Spray Foam Insulation in Arlington, TX
- Spray Foam Insulation in Pantego, TX
- Spray Foam Insulation in Dalworthington Gardens, TX
- Spray Foam Insulation in Grand Prairie, TX
- Spray Foam Insulation in Mansfield, TX
- Spray Foam Insulation in Kennedale, TX
- Spray Foam Insulation in Fort Worth, TX
- Spray Foam Insulation in Forest Hill, TX
- Spray Foam Insulation in Euless, TX
- Spray Foam Insulation in Bedford, TX
- Spray Foam Insulation in Hurst, TX
- Spray Foam Insulation in Grapevine, TX
- Spray Foam Insulation in Irving, TX
- Spray Foam Insulation in Cedar Hill, TX
- Spray Foam Insulation in Duncanville, TX
- Spray Foam Insulation in Burleson, TX
Get an Insulation Removal & Replacement Estimate
Get a written removal and replacement quote.